Your question: What PSI should my mountain bike shocks be?

Often yes, usually rear shocks run 100-200psi, but fork psi varies a lot, depending on the design. Get the sag around 25% (maybe slightly less sag in the front than the rear) and see how it rides (that’s what really matters), adjust on the trail as needed.

What PSI should rear shocks be?

The exact PSI you end up with depends on how plush/firm you want the rear shock to be, but a good starting point is 1 psi for 1 lbs in weight of the rider (including riding gear).

How much air should be in a bike suspension?

Suspension is designed to work best with between 25-35% sag (AKA a quarter to a third). For example, on a 100mm travel bike you want to aim to have 25mm-33mm of sagged travel when you sit on your bike.

How much air should be in Harley rear shocks?

Low profile rear suspension recommended air pressures: FLHX (STREET GLIDE)

Shock Load Total Weight Pressure
Rider with passenger weight of up to 150 lbs (0-68 kg) 20-30 psi (138-207 kPa)
Rider with passenger weight of over 150 lbs (over 68 kg) 25-35 psi (172-241 kPa)
Maximum GVWR See Label 40-50 psi (276-345 kPa)
IT IS INTERESTING:  Is there a bike helmet law in Massachusetts?

What is the max psi for air shocks?

The Max-Air® shock absorber is. Designed to maintain level vehicle height, they can be inflated or deflated as needed…from 20 psi to 150 psi with the vehicle loaded. Capacity is limited by vehicle suspension, tires and transmission. See vehicle owner’s manual for details.

How much air should be in mountain bike tires?

Narrow tires need more air pressure than wide ones: Road tires typically require 80 to 130 psi (pounds per square inch); mountain tires, 25 to 35 psi; and hybrid tires, 40 to 70 psi. To find your ideal pressure, start in the middle of these ranges, then factor in your body weight.

Can I use a normal pump as a shock pump?

Yes you do. You can’t generate high enough pressures with an ordinary tyre pump. … A shock pump moves a tiny amount of air up to high pressure, a tyre pump moves a big amount of air up to a low pressure.

Can you use a regular pump for shocks?

Shocks need high pressure but very low volumes. … Shocks need high pressure but very low volumes. A track pump will easily do the pressure, but never be sensitive enough – shock pumps also have a release valve to let out small amounts of air.

Can a shock pump be used for tires?

Yeah it’ll work fine, The shock pump gauge is designed for high pressure, so they aren’t very accurate til you get over 50 psi. Plus using on you tires will take a really long time, like you arm will probably fall off first.

IT IS INTERESTING:  Best answer: Is cycling 50km good?

How do you adjust Harley premium shocks?

Rotate the preload adjustment knob clockwise the recommended number of turns to increase the preload for the total weight. This weight includes the rider, passenger, cargo and accessories. The knob will click after each half rotation. Turn the knob half turns to fine tune the ride if desired.

Let's ride