The chain should be tight enough that it only allows you to move it up and down about half an inch. If there is no slack in the chain then it is too tight. And if there is too much slack then you need to tighten that chain.
What happens if bike chain is tight?
When a motorcycle chain is too tight, it’ll put stress on several components of the bike and cause the sprockets to wear faster, make the engine work harder, and cause the suspension to be tight and uncomfortable. Ultimately, a tight chain on a motorcycle may break leaving you with no power.
How do I know if my bike chain is too tight?
How can you tell if your chain is too tight? If you can’t push up on the lower jockey wheel and gain a bit of chain slack then it’s too tight.
Why is my bike chain stiff?
The thing that causes most stiff links is compressing the sideplates too tightly together, a natural result of using a chain tool that presses in the chain pin under great force to install the chain.
Can a bike chain stretch?
Do bicycle chains really stretch? The short answer is no, however they do wear in such a way as to cause their maximum length to increase. Mechanics usually refer to this as chain “stretch.” It is the sign of a worn out chain that should be replaced. Illustration of extreme wear on a chain pin.
How do you fix a stiff bike chain?
Loosen with a Chain Tool
Place the stiff link into the chain tool, on the slots closest to the turning handle. Now thread the chain tool’s pin gently against the chain pin about 1/8th of a turn, or just enough to slightly loosen the chain plates. That should loosen it enough.
How tight should a single speed bike chain be?
There should be approximately one half inch of movement in the chain up and down at a point half way between the front and rear sprockets. To change the tension loosen one of the axle-nuts and move the wheel forward or backward slightly and snug it up again.
Can I take a link out of my bike chain?
Some master links are also disposable, and can only be removed by bending them apart with needle-nose pliers or a specialized tool. Check the side of the chain to find information about the make and model.
What kind of lube should I use on my bike chain?
To apply bike chain lube, deposit a drop on the top of each link as you slowly backpedal for a few revolutions, so the lube has a chance to work its way in. Wipe off excess lube—if you don’t, it can attract more dirt to your chain. Use a light, waterproof lube such as Boeshield T-9 Waterproof Lubricant.
How often should I change my bike chain?
To avoid this accelerated wear of your cassette and chainrings, a general rule of thumb is to replace your bike’s chain every 2,000 miles. Mind you, this is just a starting point.
Do I need to oil my bike chain?
To get the most life from a chain, you should regularly clean and lubricating your chain. Clean your chain every few rides, or directly after any muddy rides. You should then apply a suitable lubricant and ensure it’s lubed correctly for each ride.
How long should a bike chain last?
Replacing your chain regularly can prolong the life of your drivetrain. Most mechanics agree that you should replace your chain about every 2,000 to 3,000 miles, depending on your riding style. Many Tour De France riders wear out two or even three chains on their primary bike over the course of the three-week race.