Most brake cables are 1.5 or 1.6mm in diameter. Most shift cables are 1.1 or 1.2mm, galvanized shifter cables are 1.3mm. … One major difference in MTB vs road BRAKE cable is the different sizes and styles of head: road cables have mushroom like ends where as MTB brake cables have barrel like ends.
Are bike brake cables universal?
Read on to find out more about the different types of cables that are available and to help you choose a replacement when required. MTB/Road brake cables are interchangeable and used for bikes with cable-activated brakes (rim brakes and non-hydraulic disc brakes).
What size is bicycle brake cable?
Brake cables are thicker, typically 1.5/1.6mm in diameter. Brake cables come with a choice of three different heads – one for mountain/flat bar brake levers, one for Shimano road/drop bar brake levers (compatible with most non-Shimano levers), and one for Campagnolo road/drop bar brake levers.
Are SRAM and Shimano brake cables the same?
the cable ends are the same, and they work. sram pitstop cables are 1.1mm and shimano cables are 1.2mm. i like the sram pitstop cables for all shimano/sram bikes a bit better and use the all the time.
What are the best bicycle brake cables?
Reviews of the Best Mountain Bike Brake Cable
- Schwinn SW76193-4 Brake and Derailleur Cable Repair Set. …
- Sunlite Lined Brake Cable Housing, 5mm x 50ft. …
- XLC Brake Cable & Housing, Universal Black. …
- Wolfride Universal Bike Bicycle Brake Cable and Housing Set. …
- Sram SlickWire Mountain Bicycle Brake Cable Kit.
3 дня назад
When should I replace bike brake cables?
Cables need to be replaced on the same schedule as frames – when broken. Housings don’t wear out from the inside, but they do get bent and cracked from either external bumps and snags, or just too much bend when installed. Internal cables don’t wear and certainly don’t stretch after the initial seating.
Should you lubricate brake cables?
Cable lubrication is recommended, especially if you ride in the rain or have old cable housings. Most brake and shift cables these days have a plastic lining built into the housing, therefore eliminating the need for lubrication.
How much does it cost to replace bike cables?
The parts alone retail around $24-$30 (not including housing). During installation they’ll have to do adjustments that would cost another $15-$30 if you weren’t buying new parts. So, minimum price is about $40, with maybe another $20 to cover the labor of running the new bits – $60 would be pretty much it.
Can I use shifter cable for brakes?
Well here is one, you can’t use brake cables to shift with or shift cables to brake with, the ends are wrong. If you ever shorten your shifter housing you will find the difference. One you can cut, one you have to have a real good set of cutters.
Can I use brake housing for shifter cables?
It’s really not recommended. Brake cable housings have a coiled metal spiral embedded in them, while compressionless shift cables have a series of tiny round wires running parallel along the length of housing. If you were to use brake cable housings on shift cables the result can be very poor shifting.
Can I use Shimano cables with SRAM?
They work best with the SRAM Slickwire housing. ET: I prefer to keep cables and housing brands matching. Shimano designed their housing to be used with their polymer-coated cables and SRAM has a similar system.
Are Jagwire cables any good?
Jagwire is great stuff. It’s the only brand I buy. I like their slick stainless wire along with their lined housing. What you just bought is actually higher-grade than what I normally run.
Do Shimano shifters come with cables?
Shimano always come with inners and outers, unless they are OE. SRAM usually just have wires. … As Ziggy said…all Shimano paired & boxed shifters (both road and mtb)should could with cables and sections of outer.